FA1 & FA2 Fully Articulated Bellow
Description
Material Specification:
- Connections: Carbon steel drilled PN16 (van-stone facings on AN2).
- Convolutions: 321 stainless steel (316 stainless steel on FA2).
- Internal sleeve: 321 stainless steel (316 stainless steel on FA2).
- Tie rods: Carbon steel.
- Hemispherical washers: Carbon steel.
- Connecting spool: Carbon steel (316 stainless steel on FA2).
The FA1 & FA2 lateral expansion compensator is suitable for use on systems up to 2500C at 16 bar pressure PED.
Certification supplied dependant upon application. All units are supplied at installation lengths and are pre stressed.
Standard Installation
These units are often used when new mains are being connected to existing mains. They allow a lateral movement to occur. These units are also useful for connections from boilers and plant, which will compensate any stresses put onto the “headers”. Advice should always be sought when using these units to ensure the units will allow the amount of movement which will occur. Please contact Shawston Technical Department for positioning of anchors and subsequent support centres.
Key Features:
- FA1 for steel pipes.
- FA2 for copper and stainless steels.
- Supplied with CE Certs where applicable.
- Internal flow liner as standard.
| CODE | Size (mm) | Installed Length +/- 25mm | Force To Deflect +/- 25mm (N/mm) | Installed Length +/- 50mm |
Force To Deflect +/- 50mm |
| EXFA1025PN16 | 25 | 465 | 10.7 | 750 | 2.8 |
| EXFA1032PN16 | 32 | 465 | 10.7 | 750 | 2.8 |
| EXFA1040PN16 | 40 | 465 | 10.7 | 750 | 2.8 |
| EXFA1050PN16 | 50 | 465 | 12.1 | 750 | 4 |
| EXFA1065PN16 | 65 | 465 | 15.9 | 750 | 5 |
| EXFA1080PN16 | 80 | 465 | 56.7 | 750 | 16 |
| EXFA1100PN16 | 100 | 465 | 94.0 | 750 | 27 |
| EXFA1125PN16 | 125 | 760 | 21.6 | 1000 | 11 |
| EXFA1150PN16 | 150 | 760 | 38.2 | 1000 | 19 |
| EXFA1200PN16 | 200 | 1010 | 29.8 | 1250 | 17 |
| EXFA1250PN16 | 250 | 1010 | 55.2 | 1250 | 32 |
| CODE | Size (mm) | Installed Length +/- 75mm | Force To Deflect +/- 75mm (N/mm) | Installed Length +/- 100mm | Force To Deflect +/- 100mm |
| EXFA1025PN16 | 25 | 1035 | 1.3 | 1320 | 1.3 |
| EXFA1032PN16 | 32 | 1035 | 1.3 | 1320 | 1.3 |
| EXFA1040PN16 | 40 | 1035 | 1.3 | 1320 | 1.3 |
| EXFA1050PN16 | 50 | 1035 | 1.7 | 1320 | 1.3 |
| EXFA1065PN16 | 65 | 1035 | 2.2 | 1320 | 1.3 |
| EXFA1080PN16 | 80 | 1035 | 7.7 | 1320 | 2.7 |
| EXFA1100PN16 | 100 | 1035 | 12.3 | 1320 | 5.4 |
| EXFA1125PN16 | 125 | 1240 | 4.3 | 1480 | 5.4 |
| EXFA1150PN16 | 150 | 1240 | 11.1 | 1480 | 4.5 |
| EXFA1200PN16 | 200 | 1490 | 11.5 | 1730 | 4.5 |
| EXFA1250PN16 | 250 | 1490 | 22.8 | 1730 | 4.5 |
